9
Description of Components
12. Alarm lamp (Orange)
Lights when a paper misfeed has occurred in the
Dual Scan Document Feeder.
13. Document lamp (Blue)
Lights when originals are placed in the Dual Scan
Document Feeder.
Le / Inner side
8
7
6
4
31 2
11
10
9
Black
5
e-STUDIO5508A/6508A/
7508A/8508A
9
Yellow MagentaCyan Black
e-STUDIO5506AC/6506AC/7506AC
1. Scanning area
Reads documents fed through the Dual Scan
Document Feeder.
& P.49 “Regular Cleaning”
2. Platen sheet
Stabilizes documents placed on the glass.
& P.49 “Regular Cleaning”
3. Original scale
For checking the size of an original placed on the
original glass.
4. Original glass
For copying 3D originals, book-type originals,
and special paper such as OHP film, as well as
plain paper.
5. USB port
For printing files stored in USB device or saving
scanned data to the USB device.
6. Control panel
Sets and operates various types of functions
such as copying.
& P.11 “Control panel”
7. Main power switch
Turns the power ON or OFF.
& P.15 “Turning ON/OFF”
8. Bridge unit
Open when paper misfeeds occur.
9. Toner cartridge
When toner runs out, a message is displayed.
Replace the cartridge.
& P.44 “Replacing Toner Cartridge”
10. Waste toner box
Replace this when a message about waste toner
box replacement is displayed.
& P.46 “Replacing Waste Toner Box”
11. Receiving tray
Holds printouts. Extend the Tray holder when
printing on large paper sizes or when printing
large volume jobs.
To Next Page
Loading...
