Toshiba E-STUDIO5506AC - About Home Screen

Chapter 1 PREPARATIONS
10
Finisher
MJ-1111
1. Upper receiving tray
2. Stapling control section
3. Hole Punch Unit MJ-6106 Series
4. Front cover
5. Sub-tray
6. Lower receiving tray
7. Tray holder
2
7
5
1
6
3
4
MJ-1112
1. Upper receiving tray
2. Stapling control section
3. Hole Punch Unit MJ-6106 Series
4. Front cover
5. Stopper
6. Saddle stitch tray
7. Sub-tray
8. Lower receiving tray
9. Tray holder
2
9
7
1
8
3
4
6
5
• Open the tray holder when an attempt to output paper, which has a length longer than that of A3, is made or
if the paper on the upper receiving tray does not align itself neatly. The output paper will be more likely to be
aligned properly.
• Pull out the sub-tray when an attempt to output paper, which is longer than the lower receiving tray, is made.
The output paper will be more likely to be aligned properly.