Toshiba E-STUDIO5506AC - Fax Functions

1
19
Placing Paper and Originals
Placing originals
Original glass
1
Raise the Dual Scan Document Feeder.
2
Place the original face down on the
original glass and align it with the le rear
corner.
3
Lower the Dual Scan Document Feeder.
& Copying Guide (PDF) : “Chapter 2: HOW TO
MAKE COPIES” - “Enlarging or Reducing Images”
Dual Scan Document Feeder
1
Place the originals face up on the original
feeder tray.
2
Align the side guides to the original length.
Do not place any heavy objects (4 kg (9 lb.) or
over) on the original glass and do not press on
it with force.
Breaking the glass could injure you.
• You need to specify the size for the following originals
because the size cannot be detected correctly.
- Highly transparent originals (e.g. overhead
transparencies, tracing paper)
- Totally dark originals or originals with dark borders
- Non-standard size originals (e.g. newspapers,
magazines)
& Copying Guide (PDF) : “Chapter 2: HOW TO MAKE
COPIES” - “Specifying the Paper Size”
• When the Dual Scan Document Feeder is closed, the
scanner lamp flashes to detect the original size.
• When placing mixed-size originals on the Dual Scan
Document Feeder, adjust the side guides to the
widest original, and then align the originals against
the guide on the front.
A4-R
(
LT-R
)
B4
(
LD
)