1.TROUBLESHOOTING FOR THE HARDWARE
48 Clearing a Paper Misfeed
7
Press the drawer button indicated in the message.
8
Set the paper size again and press [OK].
For details about how to set the paper size, refer to "Doing Paper Settings" in Chapter 1 of the Paper Preparation
Guide.
9
Press the [HOME] button to return to the basic menu. Then press [Copy] to enter the copy menu.
10
Confirm that the paper size is correctly detected if you selected [Auto (mm)] or [Auto (inch)] in
step 8.
The detected paper size is indicated on the drawer button in the equipment status indication area on the left.
An incorrect paper size or “ ” indicates an unsuccessful detection. In this case, see the following page.
P.8 “When This Screen Is Displayed”
11
Try copying or printing again.
To Next Page
Loading...
