Clearing a Staple Jam 51
TROUBLESHOOTING FOR THE HARDWARE
0.Clearing a Staple Jam
When a staple jam has occurred in the stapler of the finisher or saddle stitch unit, clear the jam following the
procedure below.
P.51 “Finisher”
P.53 “Saddle Stitch unit”
Do not touch the connectors inside the equipment. This could cause a malfunction.
Finisher
1
Open the front cover of the finisher.
2
Remove the staple cartridge.
3
Lower the guide while holding the knob.
Do not touch the stapling area.
The actual needle point could cause you personal injury.
To Next Page
Loading...
