Toshiba E-STUDIO6508A - Saddle Stitch Unit

1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Staple Jam 53
TROUBLESHOOTING FOR THE HARDWARE
 Saddle Stitch unit
1
Open the front cover of the finisher, and pull out the Saddle Stitch unit until it stops.
2
Remove the staple cartridge.
3
Raise the guide while holding the knob.
Do not touch the stapling area.
The actual needle point could cause you personal injury.
4
Remove the top staple sheet.
2
1
2
1