Toshiba E-STUDIO850 - Setup Flow for Printing Via Windows Print Server

1. Easy Setup Flow
20 Network Administration Guide — Setup Flow for Printing Features
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Network Settings
 Setting up the DDNS Session
4. Setting up the IPP Print Service.
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Print Service Settings
 Setting up the IPP Print
5. Advise users to install the Client Software for IPP printing.
Users can install the printer drivers for IPP printing by installation by Add Printer
Wizard. For more information about the IPP installation, please see the
Printing Guide.
In the IPP enabled network, users must install following client software for
printing:
• Printer Drivers
• TopAccessDocMon
• Agfa Font Manager
NOTE: TopAccessDocMon is available only when the client computers are connected to this
equipment within the same local area network. Also TopAccessDocMon cannot auto-
matically find the IP or IPX address of this equipment to connect, if users install the cli-
ent software for IPP printing. In that case, users must find the equipment in the network
using the Network Discovery feature. For more information about TopAccessDocMon,
see the Printing Guide.
Setup Flow for Printing via Windows Print Server
Connecting to Client Server type of Microsoft network
Setting up the Raw TCP
or LPR connection
Setting up the SMB
printer connection
Windows 98
Windows Me
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003