1. Easy Setup Flow
Network Administration Guide — Setup Flow for Printing Features 29
Setup Flow for Unix Printing
This equipment supports printing for Unix workstations using the Unix Filters.
System Requirements
Unix printing applies the following Unix workstations:
OS: Sun Solaris 2.6/2.7/7.8/8/9
HP-UX ver.10.20/11.x
IBM AIX 4.1.5/4.3.3/5L
SCO UnixWare 7
SCO OpenUnix 8
Red Hat Linux 6.2/7.1/7.2/7.3/8.0
SuSE Linux ver.7.0/8.1
Mandrake Linux ver.7.1/9
Turbo Linux 8
Setting up for LPR Printing
This equipment can be used with the LPR printer connection when the Unix worksta-
tions and the equipment are connected over the TCP/IP network.
Setup procedure
1. Setting up the TCP/IP.
You should set the TCP/IP and HTTP Network Service from the Touch Panel
Display the first time you use it, to make TopAccess available.
z User Function Guide
4. SETTING ITEMS (ADMIN)
3. SETTING NETWORK FUNCTIONS
Setting the TCP/IP Protocol
Setting the HTTP Network Service
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Network Settings
Setting up the TCP/IP
Setting up the HTTP Network Service
2. Setting up the LPD Print Service.
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Print Service Settings
Setting up the LPD Print
Unix workstation
Connecting over TCP/IP Network
Setting up the LPR
printer connection
To Next Page
Loading...
