1. Easy Setup Flow
32 Network Administration Guide — Setup Flow for Printing Features
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Network Settings
Setting up the TCP/IP
Setting up the HTTP Network Service
2. Setting up the FTP Server.
To enable FTP printing, the FTP Server option must be enabled.
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Network Settings
Setting up the FTP Server
3. Setting up the FTP Print Service.
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Print Service Settings
Setting up the FTP Print
4. Now any users can download to this equipment using the
FTP down-load tools.
Users can use any FTP download tools to print through FTP. For more
information about FTP printing, please see the Printing Guide.
Setup Flow for Email Printing
This equipment allows you to print a file sent to it via Email. Users can send a print job
by attaching the file that users want to print to an Email. This equipment will receive the
message from the POP3 account in the Email server and print the file.
This equipment can print the TIFF files only.
Setup procedure
1. Setting up the POP3 account for this equipment in the
incoming mail server.
P.77 "Tips of Setting up the DNS and Mail Servers for Email"
2. Setting up the TCP/IP and the HTTP Network Service to
enable TopAccess.
You should set the TCP/IP and HTTP Network Service from the Touch Panel
Display the first time you use it, to make TopAccess available.
z User Function Guide
4. SETTING ITEMS (ADMIN)
3. SETTING NETWORK FUNCTIONS
Setting the TCP/IP Protocol
Setting the HTTP Network Service
To Next Page
Loading...
