1. Easy Setup Flow
Network Administration Guide — Setup Flow for e-Filing Features 49
Setup Flow for e-Filing Features
This section describes the minimum setup flow to configure the e-Filing features.
Setup Flow for e-Filing Web Utility
Users can manage the boxes, folders, and documents in e-Filing from computers using
the web browser if you enable the e-Filing web utility.
To enable the e-Filing features, an administrator should set up the network connection
between computers and this equipment over TCP/IP, and enable the HTTP network
service. Using the e-Filing web utility, users can create, edit, delete boxes and folders
in e-Filing, and also create, edit, and delete documents stored in e-Filing using the edit-
ing functions.
System Requirements
e-Filing web utility supports the following web browsers on the Windows operating sys-
tem:
• Microsoft Internet Explorer 5.5 Service Pack 2 or later
• Netscape Navigator 4.7 or later
Setup procedure
1. Setting up the TCP/IP.
This equipment must be connected to the TCP/IP network to use the e-Filing
web utility. You should set the TCP/IP from the Touch Panel Display the first
time
z User Function Guide
4. SETTING ITEMS (ADMIN)
3. SETTING NETWORK FUNCTIONS
Setting the TCP/IP Protocol
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Network Settings
Setting up the TCP/IP
2. Setting up the HTTP Network Service to enable e-Filing web
utility.
To access e-Filing web utility, the HTTP Server option must be enabled because
the software accesses e-Filing on this equipment using the HTTP protocol.
Windows
compute
Connecting over TCP/IP Network
Managing e-Filing using
the Web browser
Copy or Scan to e-Filing
Windows
compute
e-Filing
Print to e-Filing