28 G9 ASD Quick Start Guide
LED/LCD Screen Installation Note
When installing the LED/LCD Screen module of the EOI ensure that the left side of the display is inserted
first with the top and bottom catches (see Phillips screws at underside of display) securely in place. This
ensures the proper alignment and electrical connection of the CNX connector of the LED/LCD Screen
module PCB. Gently hold the display in place while securing the Phillips mounting screw.
If improperly seated, the periphery of the LED/LCD Screen module will not be flush with the front panel
surface and the unit will not function properly.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
To Next Page
Loading...
