G9 ASD Quick Start Guide 41
PROTECTION
Overload
Motor 150% Overload Time Limit F607
ASD Overload F631
Over-Torque
Parameters
Over-Torque Trip F615
Over-Torque Detection Level During Power Running F616
Over-Torque Detection Level During Regenerative
Braking
F617
Over-Torque Detection Time F618
Over-Torque Detection Hysteresis F619
Phase Loss
ASD Output Phase Loss Detection F605
ASD Input Phase Loss Detection F608
Retry/Restart
Auto Restart Enable F301
Number of Times to Retry F303
Ridethrough Time F310
Random Mode F312
Stall
Overvoltage Limit Operation F305
Stall Prevention Factor 1 F416
Power Running Stall Continuous Trip Detection Time F452
Stall Prevention During Regeneration F453
Stall Prevention Level F601
Overvoltage Limit Operation Level F626
Trip Settings
Retain Trip Record at Power Down F602
Under-Voltage/
Ridethrough
Regenerative Power Ridethrough Mode F302
Synchronized Deceleration Time F317
Synchronized Acceleration Time F318
Undervoltage Trip F627
Undervoltage (Trip Alarm) Detection Time F628
Regenerative Power Ridethrough Control Level F629
Special Protection
Parameters
Short Circuit Detection at Start F613
Cooling Fan Control F620
Cumulative Operation Time Alarm Setting F621
Brake Answer Wait Time F630
Program Mode Menu Navigation
Primary Menu Sub Menu Parameter Name
Parameter
Number
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
To Next Page
Loading...
