Toshiba HDR5010 - Battery Installation

Inserting the Batteries into the Remote Control
1. Lift open the battery compartment cover (as shown).
2. Install 2 “R3/AAA” batteries (included); the correct polarity is shown inside the battery
compartment. Always check the positive/negative symbols on the batteries to ensure
they are inserted correctly.
3. Replace the battery compartment cover and push down until it clicks shut.
Note:
• Always dispose of old batteries safely. Check with your local council for how you should get rid of batteries.
Neverputbatteriesonareorinthebinwithnormalhouseholdwaste.
• A label with support information is located on the back of the remote control.
Getting Started
12
HDR5010 User Guide.indb 12 22/07/2010 10:38