Toshiba HWS-1403XWHM3-E - Anti-Bacteria Function; Schedule Timer Setup

Toshiba XXXXXXX(<SanSerif1>X/X)
–10–
Hydro Unit
Owner’s Manual
EN
Anti bacteria
This function performs anti-bacteria operation of the
hot water tank.
• When the ANTI BACTERIA button is
pressed, the mark appears on the remote
controller and the anti-bacteria operation is
reserved.
• The anti-bacteria operation is performed to maintain
the preset temperature (75°C) for the set time period
(30 minutes) when the preset start time (22:00)
comes according to the preset interval (7 days).
• The settings of these interval, start time, and
temperature maintaining time period can be
changed, but ask the installation company for the
setting change.
 Schedule timer
(Disable with second remote control)
Operations can be scheduled in eight STEPs for each
day of the week.
(Example)
• Monday
• Tuesday to Saturday: Same as Monday
• Sunday
Setting the schedule function
Press the SCHEDULE button and press the
SET button within five seconds while the mark
is blinking. The mark changes to lighting and the
schedule function starts working.
Cancelling the schedule function
Press the SCHEDULE button and press the
CL button within five seconds while the mark is
blinking. The mark disappears and the schedule
function is cancelled.
Setting schedule
Press the SCHEDULE button for 4 seconds or
more to enter the schedule setting mode.
Perform the following procedure to set the
schedule
• First schedule setting
Procedure:
1
→
2
→
3
→
4
→
5
→
6
STEP1 04:00 ZONE1 Heating 45°C, hot water 50°C
STEP2 07:00 ZONE1 Heating 50°C, hot water 45°C
STEP3 10:00 ZONE1
Heating disabled, hot water
45°C
STEP4 16:00 ZONE1 Heating 50°C, hot water 50°C
STEP5 23:00 ZONE1 Heating 40°C, hot water 45°C
STEP1 04:00 ZONE1 Heating 45°C, hot water 50°C
10-EN
+00EF99904001_01EN.book Page 10 Monday, June 28, 2010 6:17 PM