187
4 Electric parts
assembly
1. How to remove
1)Perform the step 1-1.
2)Disconnect the connectors and lead cables
connected to other parts from the water heat
exchanger board.
When removing the connector, release the safety lock of
the housing.
3)Remove the fixed screws.
(Ø4 × 8, 4 screws)
5 Side board 1. Side board (Right)
1)Perform the step 1-1-1), 2), 3), 4), 5).
2)Remove the fixed screws of the side board (Right).
(Ø4 × 8, 4 screws)
2. Side board (Left)
1)Remove the fixed screws of the side board (Left).
(Ø4 × 8, 4 screws)
No.
Exchange parts name
Work procedure Remarks
Electric parts assembly
Electric parts assembly
Side board (Right)
Side board (Left)
To Next Page
Loading...
