Basic Installation and Operation Guide
JK Series 720 Controllers
TOSHIBA
General Safety Information
DO NOT attempt to install, operate, maintain, or dispose of this equipment until you have read and understood
all of the product safety information and directions that are contained in this manual.
Safety Alert Symbol
The Safety Alert Symbol is comprised of an equilateral triangle enclosing an exclamation mark. This indicates
that a potential personal injury hazard exists.
Signal Words
Listed below are the signal words that are used throughout this manual followed by their descriptions and
associated symbols. When the words DANGER, WARNING, and CAUTION are used in this manual, they will be
followed by important safety information that must be carefully followed.
The word DANGER preceded by the safety alert symbol indicates that an imminently hazardous situation exists
that, if not avoided or if instructions are not followed precisely, will result in serious injury to personnel or loss of
life.
The word WARNING preceded by the safety alert symbol indicates that a potentially hazardous situation exists
that, if not avoided or if instructions are not followed precisely, could result in serious injury to personnel or loss
of life.
The word CAUTION proceeded by the safety alert symbol indicates that a potentially hazardous situation exists
that, if not avoided or if instructions are not followed precisely, may result in minor or moderate injury.
The word NOTE provides helpful information.
NOTE
To Next Page
Loading...
Need help?
General
