Toshiba MCY-MHP0506HT-E Installation Manual

40 pages

To Next Page

DHV0100301-00

English

AIR CONDITIONER (MULTI TYPE)

Installation Manual

Outdoor Unit

Model name:

Heat Pump Model

MCY-MHP0406HT-E

MCY-MHP0506HT-E

For commercial use

1FAN_IM_DHV0100301-00_EN.book Page 1 Saturday, November 4, 2017 2:39 PM

Other manuals for Toshiba MCY-MHP0506HT-E

Service Manual173 pages

Questions and Answers:

G
garrisontiffanySep 6, 2025
What does E08 error mean on Toshiba MCY-MHP0506HT-E Air Conditioner?
- J
  Jacob JacksonSep 7, 2025
  The E08 error on your Toshiba Air Conditioner indicates duplicated indoor addresses.
V
Virginia DownsSep 5, 2025
What does F24 error mean on Toshiba MCY-MHP0506HT-E?
- K
  Kayla JamesSep 6, 2025
  If your Toshiba Air Conditioner displays the error code F24, it indicates a Pd sensor error.
B
beniteznicholasSep 5, 2025
What is the F23 error on a Toshiba MCY-MHP0506HT-E Air Conditioner?
- G
  George TaylorSep 5, 2025
  If your Toshiba Air Conditioner displays the error code F23, it indicates a Ps sensor error.
M
mmckenzieSep 4, 2025
What does H06 error code mean on a Toshiba MCY-MHP0506HT-E Air Conditioner?
- W
  William LewisSep 4, 2025
  If your Toshiba Air Conditioner is showing the error code H06, it means there is a Low-pressure protective operation.
T
Traci Delgado PhDSep 3, 2025
What does H03 error mean on Toshiba Air Conditioner?
- C
  cynthialeeSep 3, 2025
  If your Toshiba Air Conditioner displays error code H03, it indicates a current detective circuit system error.
Q
qdeanSep 2, 2025
What does error F31 mean for Toshiba Air Conditioner?
- S
  Steven LongSep 2, 2025
  If your Toshiba Air Conditioner displays error F31, this indicates an Outdoor EEPROM error.
T
Troy BakerSep 1, 2025
What does E07 mean on a Toshiba Air Conditioner?
- C
  christineandersonSep 1, 2025
  The E07 error on your Toshiba Air Conditioner indicates an Indoor / Outdoor communication circuit error.
P
Patricia WilsonAug 31, 2025
Why is my Toshiba Air Conditioner showing H02 error?
- G
  Gina EspinozaSep 1, 2025
  If your Toshiba Air Conditioner is showing error code H02, it means there is a compressor trouble (Lock).
G
gwilliamsAug 31, 2025
What to do if Toshiba MCY-MHP0506HT-E displays a check code due to undefined indoor addresses?
- D
  Danielle ThomasAug 31, 2025
  If a check code appears on the remote controller of your Toshiba Air Conditioner and it's due to address setup errors with undefined indoor addresses, set up the addresses again and modify the setup.
A
Amanda GordonAug 30, 2025
What to do if Toshiba Air Conditioner displays a check code because multiple indoor units are set up with priority?
- R
  Ryan ConleyAug 30, 2025
  If the Toshiba Air Conditioner displays a check code because there are two or more indoor units set up with priority, identify the indoor units indicating “L05,” and set only one of them with priority.