21
Basic setup
Manual clock setting
You must set the date and time manually for timer recordings, ON/OFF timer and daylight saving time if the auto clock
process did not set them correctly.
Notes:
•
After a power failure or disconnection of the power, the timer
settings will be lost. In this case, reset the present time.
• When you set the minute, you can change in 10-minutes step
by holding down or .
Press MENU, then press
or to select
option.
EXAMPLE: Setting the clock to “8:30 AM”, 25th. (SAT)
March, 2006.
1
After setting the clock, date and time starts
functioning automatically.
5
Press or to select “CLOCK SET”, then
press
.
2
Press or to set the month, then press .
3
Set the day, year and time as in step 3, then
press ENTER.
4
To make corrections any time during the process
Press or repeatedly until the item you want to
change blinks, then set the item again.
/ / /
MENU
ENTER
5W50101A [E]p18-21 2/22/06, 6:41 PM21
To Next Page
Loading...
Need help?
General
