Toshiba MW24F12 - Customizing the function settings

53
Function setup (DVD)
Setting procedure
Press SETUP during stop mode.
The following on-screen display
appears.
1
2
3
To clear SETUP screen, press SETUP or
RETURN.
5
Customizing the function settings
You can change the default settings to customize performance
to your preference.
ENTER
C/D/B/A
• Repeat steps 3 and 4 to change
other settings.
• To select another operation, go
back to step 2 by pressing C
repeatedly.
Press B or A to select the desired section, then
press D or ENTER.
Press
C or D to select the desired option.
4
Change the selection using B or A, by referring
to the corresponding pages
##
~
# %
.
SETUP
DVD
VCD
CD
/Enter/Setup/Return
RETURN
Function setup (DVD)
5W50101A [E]p53-58 2/22/06, 6:43 PM53