36
Playback (VCR)
To start the playback, press PLAY.
The playback will be repeated endlessly.
Press MENU repeatedly until the menu screen
is cleared.
If you press DISPLAY, “ ” will
appear on the screen
22
.
Convenient function
To cancel repeat mode:
In step 3 above, press
or
to select “OFF” position. Press
MENU repeatedly until the menu screen is cleared.
The repeat
function is canceled automatically when the unit is switched
off.
Press or to select “AUTO REPEAT”.
2
Press or
to select “ON” or “OFF”.
If “ON” is selected, the playback will
be repeated endlessly.
3
4
5
Repeat playback
The entire video tape will be played until its end. The tape
will automatically rewind to the beginning and the playback
will be repeated.
Using the real time tape counter
Press DISPLAY.
1
Press COUNTER RESET to set the counter to
“00:00:00”.
2
Begin Playback or Recording to start the tape,
the counter will display the elapsed time.
3
When you wish to make the counter disappear,
press DISPLAY once again.
4
The on-screen real time tape counter shows the tape
running time in hours, minutes and seconds. You can
easily determine how long the tape has been running or
how much time is left on the tape.
Press MENU, then press or to select
option.
1
TIMER REC SET
AUTO REPEAT
////
MENU
OFF
PLAY
/ / /
DISPLAY
MENU
COUNTER RESET
REC
5W50101A [E]p33-37 2/22/06, 6:42 PM36
To Next Page
Loading...
Need help?
General
