EN-18 User’s Manual
dynadock™
Connecting the dynadock™ to the Computer
1. Plug the AC adaptor cord/cable into the DC-IN on the back of the
dynadock.
(Sample Illustration) Connecting the AC adaptor cord to the dynadock
2. Connect the AC Power Adaptor with the AC power cord/cable, and then
connect the AC power cord/cable to a live electrical outlet. The power
indicator on the front panel glows blue when the dynadock is
powered on.
3. Plug the square end of the USB cable into the USB upstream port on
the back of the dynadock.
(Sample Illustration) Connecting the USB cable to the dynadock
To Next Page
Loading...
