EN-20 User’s Manual
dynadock™
Uninstalling
To remove the dynadock Utility and all the drivers from your computer,
please follow the following procedures.
1. Open the uninstall screen by one of the following two ways.
n Click Start > All programs > dynadock USB > Uninstall dynadock
USB, or
n Insert the provided Installation CD into your optical disc drive. It will run
automatically and the dialog box will appear.
(Sample Illustration) Initial Screen
NOTE:
n Before starting the steps below, you must eject the dynadock™ from
your computer using the undock button or TOSHIBA dynadock™ utility
icon on your Notification Area/System Tray.
n Disconnect the dynadock™ from the computer. Any devices connected
to the dynadock™ will be disabled.
n Close all other programs and applications.
n Do not use any other previous dynadock CD.
To Next Page
Loading...
Need help?
General
