3.21 Only One Test 3 Tests and Diagnostics
Subtest 01 Pressed Key Display
When you execute this subtest, the keyboard layout is drawn on the display as
shown below. When any key is pressed, the corresponding key on the screen
changes to the key character that was pressed. Holding a key down enables
the auto-repeat function which causes the key’s display character to blink.
Press Del + Enter to end the test.
IF TEST OK, Press [Dell][Enter]key
PORTEGE M400 Maintenance Manual (960-541) [CONFIDENTIAL] 3-49
Get user manuals: See SafeManuals.com
To Next Page
Loading...
