4 Replacement Procedures 4.22 Sensor board
4.22 Sensor board
Removing the Sensor board
The following describes the procedure for removing the sensor board. (See Figure 4-39.)
1. Remove the sensor board from the slot.
2. Disconnect the sensor cable from the connector on the sensor board.
Sensor board
Sensor cable
Figure 4-39 Removing the sensor board
Installing the Sensor board
The following describes the procedure for installing the sensor board. (See Figure 4-39.)
1. Connect the sensor cable to the connector on the sensor board.
2. Install the sensor board to the slot.
4-58 [CONFIDENTIAL] PORTEGE M400 Maintenance Manual (960-541)
Get user manuals: See SafeManuals.com
To Next Page
Loading...
