Toshiba PORTEGE M400 - Hinge Spacer

4 Replacement Procedures 4.24 Hinge spacer
4.24 Hinge spacer
Removing the hinge spacer
The following describes the procedure for removing the hinge spacer. (See Figure 4-42.)
1. Remove the following screws and hinge spacer.
• M2.5×6.0B FLAT HEAD screw ×2
M2.5x6.0B FLAT HEAD
Hinge spacer
Figure 4-42 Removing the hinge spacer
Installing the hinge spacer
The following describes the procedure for installing the hinge spacer. (See Figure 4-42.)
1. Install the hinge spacer to the slot and secure it with the following screws.
• M2.5×6.0B FLAT HEAD screw ×2
4-62 [CONFIDENTIAL] PORTEGE M400 Maintenance Manual (960-541)
Get user manuals: See SafeManuals.com