4.23 Speaker 4 Replacement Procedures
PORTEGE M400 Maintenance Manual (960-541) [CONFIDENTIAL] 4-61
Installing the speaker
The following describes the procedure for installing the speaker. (See Figure 4-40 and 4-41.)
1. Install the middle frame to the top cover.
2. Install the speaker to the slot on both sides.
3. Install the speaker covers to the slot on both sides while hooking the latches.
4. Arrange the speaker cable in place.
5. Stick two insulators and three acetate tapes in place.
6. Secure the following screws to fix the middle frame and top cover.
• M2.5×6.0B FLAT HEAD screw ×2
7. Install the harness box cover and stick the insulator in place.
Get user manuals: See SafeManuals.com
To Next Page
Loading...
