4.23 Speaker 4 Replacement Procedures
4.23 Speaker
Removing the speaker
The following describes the procedure for removing the speaker. (See Figure 4-40 and 4-41.)
1. Peel off the insulator and remove the harness box cover.
2. Remove the following screws.
• M2.5×6.0B FLAT HEAD screw ×2
3. Peel off two insulators and one acetate tape.
M2.5x6.0B FLAT HEAD
Harness box cover
cetate tape
Insulator
Insulator
Figure 4-40 Removing the harness box cover
PORTEGE M400 Maintenance Manual (960-541) [CONFIDENTIAL] 4-59
Get user manuals: See SafeManuals.com
To Next Page
Loading...
