Toshiba PORTEGE M400 - Top Cover Assembly

4 Replacement Procedures 4.12 Top cover assembly
4.12 Top cover assembly
Removing the top cover assembly
The following describes the procedure for removing the top cover assembly. (See Figure 4-
22 and 4-26.)
1. Close the display and turn over the computer.
2. Remove the following screws.
• M2.5×10.0B FLAT HEAD screw ×2 (“10” in the figure below)
• M2.5×6.0B FLAT HEAD screw ×8 (“6” in the figure below)
10
10
6
6
6
6
6
6
6
6
Figure 4-22 Removing the top cover assembly (1)
4-36 [CONFIDENTIAL] PORTEGE M400 Maintenance Manual (960-541)
Get user manuals: See SafeManuals.com