4 Replacement Procedures 4.6 Slim select bay module
2. Remove the following screws, connector cover and connector from the optical drive
assembly.
• M2.0×6.0S BIND screw ×2
3. Remove the following screw and connector base from the optical drive assembly.
• M2.0×3.0S S-THIN HEAD screw ×1
4. Remove the following screws and ODD side assembly from the optical drive
assembly
• M2.0×6.0S BIND screw ×1
• M2.0×22.0S BIND screw ×1
M2.0×6.0S BIND
M2.0×6.0S BIND
M2.0×3.0S S-THIN HEAD
M2.0×6.0S BIND
M2.0×22.0S BIND
ODD side assembly
Connector cover
Connecto
Connector base
Figure 4-9 Detaching the optical drive assembly
4-18 [CONFIDENTIAL] PORTEGE M400 Maintenance Manual (960-541)
Get user manuals: See SafeManuals.com
To Next Page
Loading...
