4 Replacement Procedures 4.9 Bluetooth module
4-28 [CONFIDENTIAL] PORTEGE M400 Maintenance Manual (960-541)
Installing the Bluetooth module
To install the Bluetooth module, follow the steps below. (See Figure 4-16.)
1. Connect the Bluetooth cable to the connector on the Bluetooth module.
2. Connect the Bluetooth cable to the connector CN4400 on the system board and set
the Bluetooth module to the slot in place.
3. Connect the Bluetooth antenna cable to the connector on the Bluetooth module.
4. Stick the spacer in place referring Figure 4-16.
5. Stick the glass tape.
Get user manuals: See SafeManuals.com
To Next Page
Loading...
