4.11 Touch pad 4 Replacement Procedures
4. Disconnect the touch pad cable from the connector CN3240 on the system board.
5. Remove the following screws fixing the touch pad assembly.
• M2.0×3.0S S-THIN HEAD screw ×2
6. Remove the touch pad assembly while peeling the adhered portion.
Touch pad cable
CN3240
Touch pad assembly
M2.0×3.0S S-THIN HEAD
M2.0×3.0S S-THIN HEAD
Figure 4-20 Removing the touch pad assembly
PORTEGE M400 Maintenance Manual (960-541) [CONFIDENTIAL] 4-33
Get user manuals: See SafeManuals.com
To Next Page
Loading...
