4 Replacement Procedures 4.26 Digitizer
Installing the digitizer
The following describes the procedure for installing the digitizer. (See Figure 4-47.)
1. Slide the digitizer into the back pocket of the LCD.
CAUTION: When replacing the digitizer, fit the digitizer into the back of the LCD
toward the arrow pointing.
2. Stick two glass tapes.
3. Secure the digitizer with the following screws.
• M2.0×4.0B BIND screw ×2
4-74 [CONFIDENTIAL] PORTEGE M400 Maintenance Manual (960-541)
Get user manuals: See SafeManuals.com
To Next Page
Loading...
