4.31 Fluorescent lamp 4 Replacement Procedure
Setting the bezel
1. Fit the bezel into the frame from the TAB side. ((1) in the bellow figure)
2. Set two latches on the side. ((2) in the bellow figure)
3. Set the latches on the bottom side. ((3) in the bellow figure)
CAUTION: Be careful not to damage the cell, FPC and B/L.
Figure 4-62 Replacing 12.1 Inch TMD fluorescent lamp (10)
PORTEGE M400 Maintenance Manual (960-541) [CONFIDENTIAL] 4-91
Get user manuals: See SafeManuals.com
To Next Page
Loading...
