Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler!
Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.
• M2.0×3.0C S-THIN HEAD screw ×1
Rev D
• M2.0×22.0C BIND screw ×1
PORTÉGÉ M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 4-23
Figure 4-12-SATA Detaching the optical drive assembly(PORTÉGÉ M750 only)
Installing the slim select bay module
The following describes the procedure for installing the slim select bay module. (See Figure
4-10 and 4-11.)
PORTÉGÉ M700 only
1. Install the ODD side assembly to the optical drive assembly and secure it with the
following screws.
• M2.0×6.0C BIND screw ×1
• M2.0×22.0C BIND screw ×1
2. Install the connector base to the optical drive assembly and secure it with the
following screw.
• M2.0×3.0C S-THIN HEAD screw ×1
M2.0×3.0C S-THIN HEAD
M2.0×3.0C S-THIN HEAD
M2.0×22.0C BIND
ODD side assembly
Connecto
Connector base
To Next Page
Loading...
