Toshiba Portege M700 - Pen Holder Assembly

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorla
g
e nic
h
4.27 Pen holder assembly
Removing the Pen holder assembly
The following describes the procedure for removing the pen holder assembly. (See Figure 4-
42.)
1. Remove the pen holder assembly from the slot.
PORTÉGÉ M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 4-73
Figure 4-42 Removing the pen holder assembly
Installing the Pen holder assembly
The following describes the procedure for installing the pen holder assembly (See Figure 4-
42).
1. Install the pen holder assembly to the slot while inserting the hole into the guide.
Pen holder assembly
Guide
Hole