Toshiba Portege M700 - PC Card Slot

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.
F
ehler! Formatvorla
g
e nic
h
Rev B
4.24 PC card slot
Removing the PC card slot
The following describes the procedure for removing the PC card slot. (See Figure 4-
PCCARD.)
1. Remove the following screws securing the PC card slot.
• M2.0×3.0C S-THIN HEAD screw ×2
• M2.0×8.0C S-THIN HEAD screw ×2
2. Remove the PC card slot while pulling out the latch to release it.
M2.0×3.0C S-THIN HEAD
M2.0×8.0C S-THIN HEAD
Latch
PC card slot
Figure 4- PCCARD Removing the PC card slot
4-68 [CONFIDENTIAL] PORTÉGÉ M700/M750 Maintenance Manual (960-661)