Toshiba Portege M700 - Fan Hood

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler!
Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.
4.9 Fan hood
NOTE: When repairing the PC, clean the fan hood and heat sink with a vacuum cleaner
and cotton sticks, and remove dusts with tweezers.
Removing the Fan hood
The following describes the procedure for removing the fan hood. (See Figure 4-14.)
1. Remove the following screw and fan hood cover.
• M2.0×4.0B BIND screw ×1
2. Remove the fan hood from the slot.
Fan hood cover
M2.0×4.0B BIND
Fan hood
Guide
Guide
Figure 4-15 Removing the fan hood
4-28 [CONFIDENTIAL] PORTÉGÉ M700/M750 Maintenance Manual (960-661)