Toshiba Portege M700 - Page 281

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler!
Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.
6. Return the display counterclockwise in the original position, close the display and
turn over the computer.
7. Remove the following screws.
• M2.5×16.0B FLAT HEAD screw ×3 (“16” in the figure below)
• M2.5×6.0B FLAT HEAD screw ×10 (“6” in the figure below)
8. Separate the base assembly and cover assembly.
16
6
6
6
6
6
6
16
6
16
6
6
Base assembly
Cover assembly
6
Figure 4-27 Removing the base assembly and cover assembly (3)
PORTÉGÉ M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 4-45