Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.
ehler! Formatvorla
e nic
Rev B
Installing the Smart card slot
The following describes the procedure for installing the Smart card slot. (See Figure 4-
SMART.)
1. Set the Smart card slot in place and connect the Smart card slot cable to the
connector CN2170 on the system board.
2. Secure the Smart card slot with the following screws.
• M2.0×3.0C S-THIN HEAD screw ×2
• M2.0×6.0C S-THIN HEAD screw ×2
•
PORTÉGÉ M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 4-71
To Next Page
Loading...
