Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.
ehler! Formatvorla
e nic
6. Turn up the insulator and peel off the glass tapes.
7. Disconnect the LCD cable and digitizer cable from the connectors on the back of the
LCD unit.
CAUTION: When removing the cables, be careful not to damage the connectors.
8. Remove the LCD assembly from the display cover.
CAUTION: When putting the LCD assembly on the display cover, lay a mat or something
under the LCD assembly to protect the computer and the LCD from a
scratch or breakage.
PORTÉGÉ M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 4-87
Figure 4-53 Removing the LCD assembly (2)
Glass tape
Glass tape
LCD cable
Digitizer cable
LCD assembly
Insulator
To Next Page
Loading...
