3 Tests and Diagnostics 3.4 Heatrun Test
Rev B
3.4 Heatrun Test
To execute this program, press 2, Repair Heatrun and press Enter in the startup menu, press
Enter.
After selecting this test, the same subtests as 3.23 Running Test are executed successively.
For more details on the procedure and test content, refer to Running Test.
When the heatrun test ends normally, following message appears in the display.
************************************************
HEATRUN NORMAL END
************************************************
Press any key to continue...
Press any key and return to the startup menu.
NOTE: The test result (Errorlog.txt) is stored in the floppy disk. The result is displayed in
the same format as Log Utilities. For more details of the format, refer to 3.22
Log Utilities.
3-12 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661)
To Next Page
Loading...
