Toshiba Portege M750 - Slim Select Bay Latch

4.15 Slim select bay latch 4 Replacement Procedures
4 Replacement Procedures
4.15 Slim select bay latch
Removing the Slim select bay latch
The following describes the procedure for removing the slim select bay latch. (See Figure 4-
27.)
1. Remove the slim select bay cap on the bottom while pushing two latches inside to
release them.
2. Remove the slim select bay latch in the direction in the figure below. Be careful not
lose the spring.
Slim select bay cap
Slim select bay latch
Spring
Latch
Latch
Figure 4-27 Removing the slim select bay latch
PORTÉGÉ M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 4-47