4 Replacement Procedures 4.5 Reserve pen case
4.5 Reserve pen case
Removing the Reserve pen case
The following describes the procedure for removing the reserve pen case. (See Figure 4-6.)
1. Close the display and turn over the computer
2. Push slightly the point shown by the arrow using an object with a thin tip.
3. Slide the reserve pen case as shown in the following figure and remove it.
Reserve pen case
Object (with a thin tip)
Figure 4-6 Removing the reserve pen case
Installing the Reserve pen case
The following describes the procedure for installing the reserve pen case. (See Figure 4-6.)
1. Seat the reserve pen case to the slot and slide it until it locks.
4-16 [CONFIDENTIAL] PORTÉGÉ M700/M750 Maintenance Manual (960-661)
To Next Page
Loading...
