4.35 Wireless LAN antenna/Internal microphone/Web camera cable 4 Replacement Procedures
4.35 Wireless LAN antenna/Internal microphone/Web camera cable
Removing the Wireless LAN antenna/Internal microphone/Web camera cable
Wireless LAN antennas/internal microphone/web camera cable are included in a LCD cover
assembly (hinge assembly is also included). When the wireless LAN antennas or internal
microphone or web camera cable are/is defective, replace with a new LCD cover assembly.
However, when replacing only the LCD cover assembly or hinge assembly, arrange the
antennas and cables, following the procedures below.
The following describes the procedure for removing the LCD cover assembly. (See Figure 4-
57.)
1. Remove the following screws and separate the LCD cover assembly and hinge
assembly.
• M2.5×6.0B FLAT HEAD screw ×2
LCD cover assembly
Hinge assembly
M2.5x6.0B FLAT HEAD
M2.5x6.0B FLAT HEAD
Figure 4-58 Removing the wireless LAN antenna/Internal microphone/web camera cable
PORTÉGÉ M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 4-109
To Next Page
Loading...
