4 Replacement Procedures 4.35 Wireless LAN antenna/Internal microphone/Web camera cable
LCD cover assembly
Hinge assembly
M2.5x6.0B FLAT HEAD
M2.5x6.0B FLAT HEAD
Figure 4-59a Removing the wireless LAN antenna/3G antenna/Internal
microphone/webcamera cable(3G model only)
Installing the Wireless LAN antenna/Internal microphone/Web camera cable
The following describes the procedure for installing the LCD cover assembly. (See Figure 4-
57.)
1. Set the hinge assembly onto the LCD cover assembly and secure them with the
following screws.
• M2.5×6.0B FLAT HEAD screw ×2
2. Set the antennas and cables in place.
4-110 [CONFIDENTIAL] PORTÉGÉ M700/M750 Maintenance Manual (960-661)
To Next Page
Loading...
