Toshiba Portege M750 - Tools and Equipment

4.1 Overview 4 Replacement Procedures
Rev B
Mark Mark Mark Gap standard Gap standard Gap standard
LCD COVER
–
LCD TOP COVER LCD COVER
–
LCD TOP COVER
J1 J2
MASK – LCD
COVER
C3
MASK –
B
BASE –
COVER
K
MASK –
B
BASE
–
FRONT COVER
(
Around
)
N
02
BASE – HDD COVER (Around)
BASE
–
BATTERY
G2
H
G
BATTERY –
BASE – MEMORY COVER (Around)
I
K2
COVER
-
BASE
C1
LCD COVE
R
- MASK
Tools and Equipment
For your safety and the safety of the people around you, it is important that you use
Electrostatic Discharge (ESD) equipment. Correctly utilizing of the equipment increases the
percentage of successful repairs and saves on the cost of damaged or destroyed parts. The
following equipment is required for disassembly and assembly.
• One Philips screwdriver with type 0 bit (for THIN HEAD screws)
• One Philips screwdriver with type 1 bit (for screws other than above)
• Tweezers (for lifting screws)
• ESD mats (lay on work table or floor)
• An ESD wrist strap and heel grounder
• Anti-static carpet or flooring
• A pair of needle-nose pliers
• Air-ionizers in highly static sensitive areas
• Antenna coaxial cable disconnector
PORTÉGÉ M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 4-7