4 Replacement Procedures 4.19 Front panel
4.19 Front panel
Removing the Front panel
The following describes the procedure for removing the front panel. (See Figure 4-31.)
1. Remove the front panel from the base assembly while lifting the system board up
slightly.
Front panel
Figure 4-31 Removing the front panel
Installing the Front panel
The following describes the procedure for installing the front panel. (See Figure 4-31.)
1. Set the front panel to the system board in place while lifting the system board up
slightly.
NOTE: After setting the front panel, make sure that the wireless communication switch
moves properly.
4-54 [CONFIDENTIAL] PORTÉGÉ M700/M750 Maintenance Manual (960-661)
To Next Page
Loading...
