4.32 LCD unit/Touch panel/Digitizer 4 Replacement Procedures
Do not pull up the PCB hardly when installing the digitizer because it may result to give
stress on the TAB or PCB and cause the display function failure.
Make sure that three latches fit the digitizer securely.
If the latches are not locked securely, it may result to move the digitizer and give stress on
the TAB or PCB and cause the display function failure.
Do not turn up the digitizer because it may result to give stress on the TAB or PCB and
cause the display function failure.
PORTÉGÉ M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 4-95
To Next Page
Loading...
