4.32 LCD unit/Touch panel/Digitizer 4 Replacement Procedures
1. Peel off separators of double-sided tapes on the back of a new digitizer.
2. Slide a new digitizer into the back pocket of the LCD and fix it with the double-sided
tape.
NOTE: When installing a new digitizer, follow the instructions below.
Stick the glass tape in place to fix the LCD assembly.
Glass tape
Ta
Ta
Insulato
Insulato
Peel off the separators of the three double-sided tapes toward the arrow pointing.
Double-sided tape
PORTÉGÉ M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 4-101
To Next Page
Loading...
