4.32 LCD unit/Touch panel/Digitizer 4 Replacement Procedures
7. Place the LCD assembly to the display cover and secure it with the following screws.
• M2.0×4.0B S-THIN HEAD screw ×4
NOTE: For models with a digitizer and touch panel, be careful not to put the LCD cable
under the metal plate of the touch panel.
NOTE: For models with a LCD (only), set the LCD spacer on the display cover in place
as shown bellow.
LCD spacer
LCD spacer
LCD spacer
LCD spacer
PORTÉGÉ M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 4-103
To Next Page
Loading...
